Toilet Repair & Installation

Our crew provides expert toilet repair, replacement, and installation services for homeowners throughout Tulsa, Broken Arrow, Owasso, Bixby, Claremore, and surrounding communities. Family-owned by the Hudson family since 2017, we deliver upfront pricing with no hidden fees and flat-rate pricing across the Tulsa metro. When your toilets need attention, our licensed team is ready to help.

• Toilets rocking or feeling loose after new tile installation or shifting floors.
• Water leaking from the base, tank components, fill valves, or flushometers.
• Toilets overflowing, failing to flush properly, or backing up when nearby plumbing fixtures run.
• Worn-out internal tank parts such as flappers and fill valves causing constant running or leaks.
• Rusted toilet flanges and damaged hardware requiring a complete pull and reset.

• Inspect the toilet and tank components to identify leaks, running water, or flushing issues.
• Clear stubborn clogs safely using toilet augers or chain snakes, pulling the fixture when necessary.
• Replace worn internal parts like fill valves, flappers, flushometers, and supply lines.
• Pull and reset toilets using new wax rings, sturdy bolts, and secure supply lines.
• Repair or replace rusted toilet flanges and connection hardware to stop base leaks.

• Water pooling around the base of the toilet or leaking from the tank.
• A toilet that rocks or feels unstable when you sit down.
• Constant running water or a tank that fails to refill properly.
• Frequent clogs, slow flushing, or water rising when you use a bathroom sink.

Call or text (918) 891-1737. Open 24 hours Monday–Saturday · Closed Sunday.

• An upstairs toilet was responsible for water pouring through air vents at this Bixby, OK 74008 home. Both a soft clog and a failed fill valve were found. The diagnosis was completed October 7, 2026, and recorded in Ceiling and Air Vent Leak Diagnosis in Bixby.

Plumber in Bixby

Catoosa, OK

• The toilet's shutoff would not close completely at this Catoosa, OK 74015 property. Replacing that valve was the work completed July 30, 2026. See Toilet Shutoff Valve Replacement in Catoosa for the supply-side repair, distinct from replacing the toilet itself.
• A damaged drain serving an upstairs toilet was replaced at this Catoosa, OK 74015 home. The toilet was then reset with a new shutoff valve. That drain-and-fixture job was completed May 29, 2026, as recorded in Toilet Drain Line Repair and Toilet Reset in Catoosa.
• A toilet hose replacement was one of three tasks completed at this Catoosa, OK 74015 property on November 20, 2025. The crew also replaced a shower cartridge and repaired an outdoor hydrant washer. The combined repair record is Shower, Hydrant and Toilet Repairs in Catoosa.

Claremore, OK

• Resetting a master-bathroom toilet formed part of the visit completed May 12, 2026, in Claremore, OK 74017. The crew also corrected vanity shutoffs and performed tankless maintenance. That bathroom and heater work is documented in Tankless Service and Toilet Reset in Claremore.

Collinsville, OK

• The work in Collinsville, OK 74021 included a toilet reset and cleaning of interior drains. A main sewer clog was also cleared toward the septic tank. Completed July 6, 2026, these related drainage tasks are described in Main Line Sewer and Drain Cleaning in Collinsville.

Jenks, OK

• Installing a new toilet was part of the Jenks, OK 74037 bathroom work completed September 11, 2026. The vanity faucet was reconnected and the master bathtub trim reinstalled during the same job. The fixture record is Toilet Installation and Bathroom Fixture Reconnection in Jenks.

Sand Springs, OK

• Kitchen and bathroom fixture repairs accompanied replacement of a split outdoor hydrant at this Sand Springs, OK 74063 property. Those tasks were completed July 31, 2026. The linked job account, Outdoor Hydrant Replacement and Fixture Repairs in Sand Springs, covers that mix of indoor and outdoor work.

Sapulpa, OK

• An auger cleared the toilet blockage in Sapulpa, OK 74066, but aging tank valves explained the weak flush. Those were separate findings on the job completed October 2, 2026. Read Toilet Clog Clearing in Sapulpa for the clog clearing and flushing diagnosis.

Skiatook, OK

• A snapped bolt left the toilet wobbly at this Skiatook, OK 74070 home. The toilet was pulled and reset, with completion recorded August 28, 2026. You can see how we secured the existing toilet in Wobbly Toilet Pull and Reset in Skiatook, which covers the pull-and-reset work without replacing the toilet.

A dry trap is usually behind that smell. The guide explains the first checks and when the problem calls for a plumber. Read the guide.

The toilet repair accounts here were written from the actual job records. Real photos from before and after the work are included with those records, showing the jobs described.

• Toilet and Hydrant Repair in Tulsa
• Leaking Toilet Wax Ring in Tulsa

See all job stories → · How our pricing works →

The July 27 Tulsa wax-ring visit began with water appearing at the base when the toilet flushed. Once the fixture was removed, our plumber found it had no hardware securing it to the floor. The reset included bolts and hardware, a wax ring and a supply line. A separate flapper problem inside the tank was also corrected. The crew checked both the reset fixture and the tank repair and found no leaks.

At the August 28 Skiatook visit, a snapped closet bolt explained a wobbling toilet. Travis and Cody pulled and reset the existing fixture with a new seal, bolts, caps and supply line. Shims removed the remaining movement, and repeated tests showed no leaks before white caulk finished the base. We kept the existing toilet and closet flange; neither was replaced as part of the pull-and-reset work described on this visit.

Those are two different reasons to inspect beneath a loose or leaking toilet: missing mounting hardware on one visit, a broken bolt on the other. Both jobs reused the existing fixture after correcting its support and connection. For both homeowners, the work addressed the mounting and seal beneath the existing toilet, rather than replacing the bowl to fix the base problem.

On the October 2 Sapulpa call, the homeowner reported no sink or tub backup and no toilet gurgle when the sink ran. An auger cleared the toilet blockage and it flushed afterward. The old fill and flush valves were not working properly, leaving too little water in the tank for a strong flush. Our plumber explained the tank problems and recommended a follow-up repair. The clog was cleared on this visit, but replacing those tank valves was still to be done.