Kitchen and Bathroom Plumbing Installs in Tulsa

Acts of Service Plumbing provides expert kitchen and bathroom plumbing installations, fixture replacements, and plumbing remodels throughout Tulsa, Bixby, Broken Arrow, Jenks, Claremore, Coweta, and Sand Springs. Our crew handles everything from new sinks, vanities, and toilets to complete water and gas line setups with upfront pricing.

• Kitchen sink faucets leaking at the base or handles.
• Toilets that clog, run slow, or rock due to worn wax rings and flanges.
• Water pressure dropping significantly when multiple fixtures run at the same time.
• Damaged or broken drain lines under bathtubs and vanities requiring floor repairs.
• Leaking spigots or water lines running into crawl spaces.

• Disconnecting old fixtures and resetting new kitchen sinks, vanities, toilets, showers, and dishwashers.
• Running new water lines, drain lines, and gas connections using modern PEX and PVC materials.
• Pulling toilets to clear deep blockages and installing new wax rings, shims, and supply lines.
• Replacing worn angle stops, valves, traps, and supply lines to stop leaks and restore proper flow.

• Water pressure drops across the house when you turn on the shower or another faucet.
• Your kitchen faucet or bathroom sink leaks around the base or handles.
• Toilets are slow to fill, back up, or leak around the base.
• You notice wet spots, leaks, or water damage under vanities or bathtubs.
• You are planning a kitchen or bathroom remodel and need new plumbing fixtures installed.

Call or text (918) 891-1737. Open 24 hours Monday–Saturday · Closed Sunday.

Rough-in and finish plumbing for bathroom remodels: relocating drains and supply lines, new valves, tubs, showers, vanities and toilets, inspected and tested to code.

• An incorrectly installed drain was leaking beneath a freestanding tub at this Bixby, OK 74008 property. The replacement used a new toe-tap drain and solid tailpiece. Completed October 16, 2026, the bathroom drain work is covered in Freestanding Tub Drain Replacement in Bixby.
• Two dual vanities, a new shower valve and a gas line were included in this Bixby, OK 74008 remodel rough-in. Drains were moved beneath the slab as part of the work completed October 22, 2026. The project record is Bathroom and Kitchen Remodel Plumbing Rough-In in Bixby.

Plumber in Bixby

Catoosa, OK

• Repairing the kitchen faucet was included with a gas water heater replacement at this Catoosa, OK 74015 home. A moisture-sensing shutoff was fitted with the heater. The work, completed September 2, 2026, is documented in Gas Water Heater Replacement in Catoosa.

Claremore, OK

• The existing stove gas line received an elbow and a new shutoff valve at this Claremore, OK 74017 property. That kitchen connection work was completed September 4, 2026. Its installation record is linked as Kitchen Stove Gas Shutoff Valve Installation in Claremore.

Collinsville, OK

• The kitchen disposal at this Collinsville, OK 74021 property would not respond. A reset got it to engage on the visit completed July 28, 2026. Read Garbage Disposal Reset in Collinsville to see how the existing unit responded to its reset button without needing a replacement disposal.

Coweta, OK

• New shutoff valves were included when the sink, faucet, disposal and dishwasher were reset in this Coweta, OK 74429 kitchen. Completion was August 5, 2026. The kitchen reconnection work is described in Kitchen Sink and Dishwasher Reset in Coweta.

Jenks, OK

• Bathroom reconnection at this Jenks, OK 74037 property included the vanity faucet and master bathtub trim, as well as a new toilet installation. Those fixture tasks were completed September 11, 2026. See the full record in Toilet Installation and Bathroom Fixture Reconnection in Jenks.

Sand Springs, OK

• A new PVC shower drain and P-trap were tied into the existing cast iron at this Sand Springs, OK 74063 property. The bathroom drainage work was completed July 30, 2026. That material connection is documented in Shower Drain Replacement in Sand Springs.
• A refrigerator received a new PEX waterline and an icemaker valve at this Sand Springs, OK 74063 home. The kitchen water-supply installation was completed April 7, 2026. Read the details of that installation in Refrigerator Icemaker Water Line in Sand Springs to see the waterline and valve work completed for that refrigerator.

Sapulpa, OK

• Drain piping serving both a tub and a vanity was replaced beneath this Sapulpa, OK 74066 home. Completion was October 8, 2026. The work beneath the house is described in Tub and Vanity Drain Line Replacement in Sapulpa; the replacement piping served the tub as well as the bathroom vanity.

Our plumbers' kitchen and bathroom jobs are described in these stories, with real before-and-after photographs taken during the work. You can see the fixtures and piping involved, not just read a list of services.

• Laundry Sink and Washing Machine Shut-Off Installation in Broken Arrow
• Prep Sink Basket Strainer Replacement in Tulsa
• Leaking Garbage Disposal in Broken Arrow

See all job stories → · How our pricing works →

On the October 22, 2026 Bixby remodel, Michael and Josh were working with a contractor across the master bath, hall bath and kitchen. The layout called for a walk-in shower with a handheld diverter, a freestanding tub moving to a new position, and two single vanities becoming dual vanities. The kitchen sink and ice maker connection also needed to move. Moving those fixtures meant moving the hidden drains and water supplies too, before the rooms could be finished.

The crew opened concrete to relocate the tub and kitchen drains and water lines. They roughed in the shower valve and diverter, left the shower drain raised for the tile crew and moved the ice maker box about 24 inches. The work also included replacing about 30 feet of one-inch black iron gas piping across the kitchen and pressure testing the gas lines. The remodel job account covers the rough-in work completed on this visit, rather than a finished kitchen and bathroom installation.

A smaller laundry update in Broken Arrow still required new connections beneath the sink. Trystan and Josh installed a basket strainer, bag trap, tailpiece extension and two compression angle stops. The washing machine received two half-inch boiler drains on brass close nipples as its shutoffs. Even on this smaller laundry project, the sink needed drain connections that fit its new layout and shutoff valves that worked when the homeowner needed them.

Michael includes the valves under fixtures in an inspection because homeowners rarely see those tucked-away connections. He looks for rust, deposits and slow dripping. The laundry sink installation supplied a separate shutoff for each sink supply, so that fixture could be isolated without relying only on the whole-house valve. On that project the washing machine valves were renewed during the same visit.

For shower work, the rough-in valve and the decorative trim are separate items. At our Claremore valve replacement, the homeowner supplied both, and our crew connected the new valve to existing copper with press fittings and PEX. The homeowner's preferred showerhead position was discussed while the wall was open. Those are useful installation decisions to settle before the wall and tile cover the piping.