Plumber in Glenpool, OK

Glenpool is a short drive down Highway 75 from our Bixby office, so we can usually get a plumber there fast when water is where it should not be. Leaks drive most of our Glenpool work: slab leaks, shower pans and supply lines, plus water heater swaps. In the last 12 months we completed 25 jobs in Glenpool.

Opening a Glenpool shower or reaching a water line behind sheetrock does not change how we treat the rest of the house. We cover our shoes and put down tarps, taking care of your home the way we take care of ours.

Public phone: (918) 891-1737. Email: actsofserviceplumbing@gmail.com.

Open 24 hours Monday–Saturday · Closed Sunday.

Glenpool calls center on leaks, outdoor hydrants and drains. In the past year we repaired two slab leaks, handled an emergency water leak and replaced water heaters at homes in the 74033 ZIP code.

From November 2025 through October 2026 our crew completed 25 jobs at Glenpool addresses (ZIP 74033). Here are some of them, straight from our job records:

• October 2026 — Repaired an outdoor hydrant
• October 2026 — Tested a shower pan for leaks
• September 2026 — Emergency water leak
• July 2026 — Cleared an interior drain
• March 2026 — Serviced a standard tank water heater
• January 2026 — Gas leak detection
• December 2025 — Slab leak repair (two homes)

These Glenpool jobs show the work our crew has completed in ZIP 74033, from a pump control to a leaking shower. Each write-up explains the problem and repair, gives the completion date and links to the relevant service so you can learn more before booking a visit.

• Recirculating Pump Aquastat Installation in Glenpool — We fitted an aquastat control to the existing recirculating pump, then connected it and tested operation. The pump itself stayed in place. Completed November 3, 2026 in Glenpool, OK 74033. Related services: Plumbing inspections.
• Shower Drain and Valve Replacement in Glenpool — A leaking pan brought us to the shower. The plumbing work replaced both its drain piping and its valve. Completed October 19, 2026 in Glenpool, OK 74033. Related services: Drain cleaning & sewer repair, Shower & tub valve repair.
• Master Bedroom Water Leak Repair in Glenpool — Our repair addressed the water line at the master bedroom. The visit also included fitting a shutoff valve on the circulating line. Completed October 15, 2026 in Glenpool, OK 74033. Related services: Water leak repair.
• 50-Gallon Gas Water Heater Replacement in Glenpool — We removed the old gas heater and put in a 50-gallon replacement. Both the water-side and gas-side connections were updated during the installation. Completed September 4, 2026 in Glenpool, OK 74033. Related services: Faucet & fixture installation, Water heater installation.
• Gas Dryer Connection in Glenpool — A new flexible line connected this gas dryer. After hooking up the dryer, we checked the fittings for leaks to verify the new connection. Completed April 3, 2026 in Glenpool, OK 74033. Related services: Gas line repair.

See all job stories →

A test of a walk-in shower pan in Glenpool confirmed that it leaked, but did not identify the exact failure point. With the tile removed, our crew could reach both the drain below the shower floor and the existing valve. We replaced the drain piping and installed a Delta 1700 series valve connected to the PEX supply lines, with matte black selected for the finish.

Our scope was demolition and plumbing, not tile or drywall installation. The rebuild plan included one pan test after the pan and drain were installed, before tile, and a second test after tile. The Glenpool shower story explains both planned checks and the plumbing work. Tile and drywall finishing were outside our scope, so this was not a complete bathroom remodel by our crew.

The master-bedroom leak was a different kind of access problem. We enlarged the sheetrock opening to reach a three-quarter-inch PEX line, then replaced two elbows and added two couplings. That visit also called for a half-inch ball valve on the circulating line at the bottom of the water heater.

The November aquastat visit added a control to an existing recirculating pump beside a tank water heater. We connected the aquastat and tested operation; we did not replace the pump. The story records a one-year warranty on that aquastat installation. Read the control installation for the actual completed scope.

The September tank replacement took place in a narrow utility closet beside the furnace. Along with the 50-gallon gas heater, we installed a drip pan, expansion tank, water hammer arrestors, stainless flexible water connections and a main shutoff. The gas connection received a flexible connector and drip leg, and the old tank was removed for disposal.

On the April dryer call, our work was a gas-dryer connection with a new flex line and leak checks at the fittings. It was a separate appliance job from the heater replacement and pump-control work. The five Glenpool visits above cover different systems, so check the linked repair that matches your concern, whether that is a leaking shower pan, a bedroom water line or a gas appliance connection.