Emergency & LeaksEmergency PlumbingWater Leak RepairSlab Leak DetectionWhole-Home RepipingGas Line RepairDrains & SewerDrain Cleaning & Sewer RepairMain Line Sewer CleaningSewer Camera InspectionGarbage DisposalWater Heaters & Water SystemsWater Heater RepairWater Heater InstallationTankless Water HeatersWater FiltrationPressure Regulator (PRV)Fixtures & MoreToiletsFaucets & FixturesShower & Tub ValvesKitchen & Bath InstallsOutdoor Hydrants & SpigotsCommercial PlumbingInspection & MaintenanceJob Stories About Reviews FAQ Contact Book Now Call (918) 891-1737 Book Online Text Us Request Service
Acts of Service Plumbing · Family-owned plumbers serving Broken Arrow

Pressure Reducing Valve Replacement in Broken Arrow

Answer

The short answer

Banging or noisy pipes in Broken Arrow are often a failing pressure reducing valve (PRV). We test your pressure, replace the valve and set it to a safe level. You get a flat-rate, upfront price before any work starts. A service call starts at $89 and is waived when you approve the repair.

Real jobs

Recent jobs in Broken Arrow

  • Noisy plumbing with pressure over 100 psi. Incoming pressure was over 100 psi and the PRV was overworking. We replaced it, checked the ice maker valve and hydrants, and set the pressure down to 60 psi. Read the job story.
  • Water hammer. The old PRV had failed. We replaced it with a new 3/4-inch double-union PRV and new fittings and a ball valve. Read the job story.
Pricing

Starting prices

  • Whole-house water pressure test: starts at $199
How we help

Service in Broken Arrow

We are serving Broken Arrow now. See water pressure regulators or all our Broken Arrow plumbing.

Page last updated November 2026.

From our work

The noise returned after the warranty valve was changed

The first Broken Arrow pressure story started with a noise that the homeowner noticed after refrigerator service. Trystan and Josh suspected the pressure reducing valve, which was still under warranty. They replaced it, but the sound came back. They then checked the ice maker valve, a ball stop without a rubber washer, and tested again with that supply shut off.

Our crew ran both outdoor hydrants several times while checking the noise. As they cleaned up, they heard it again, though it was quieter. They turned the refrigerator supply back on, lowered the house setting to 60 psi and checked once more. Everything was working at that point. Read the full diagnostic story for the testing that continued after the valve replacement.

The technician's explanation linked the condition to two hydrants running with the regulator set at 70 psi, followed by a quick shutoff, especially with incoming pressure over 100 psi. Those figures describe this Broken Arrow visit. The final 60 psi setting was the adjustment made after repeated testing, not a measured value we assume for every home in the city.

From our work

A double-union replacement on the separate water hammer job

The other Broken Arrow call involved water hammer and a regulator that our crew determined needed replacement. This repair used a three-quarter-inch double-sided-union PRV. Its connections included ProPress adapters and expansion adapters, tees, elbows, a ball valve and male adapters.

On this visit, the double-union valve needed its own set of adapters, tees, elbows and a ball valve. The double-union PRV story covers that installation. The warranty job above needed further noise checks after its replacement valve went in. Both calls involved pressure control, but our crew had different work to finish at each home.

From our work

Pressure testing and replacing a valve are not one price

The $199 starting price listed here covers a whole-house water pressure test. We diagnose the problem, then quote the repair upfront. Replacing a regulator also involves the valve and the fittings needed to connect it. On the warranty job, our crew kept checking the refrigerator supply and hydrants after changing the PRV. The separate water hammer repair needed a new valve, fittings and a ball valve. Those are different jobs from measuring pressure alone.

Michael recommends a house pressure range of 60 to 75 psi. On the first Broken Arrow job, repeated testing led our crew to the lower end of that range. The incoming supply was over 100 psi, and the higher house setting allowed noise when the hydrants shut quickly. Those readings came from that home; we test your supply before deciding what adjustment or repair it needs.

Questions

Straight Answers

Why are my pipes banging in Broken Arrow?

Often high incoming pressure or a failing pressure reducing valve. On one job the pressure was over 100 psi.

What should my water pressure be?

On our Broken Arrow PRV job we set it to 60 psi after replacing the valve.

How much is a water pressure test?

A whole-house water pressure test starts at $199.

Did the Broken Arrow refrigerator valve have a rubber washer?

No; the technician identified it as a ball stop without a rubber washer during the noise checks.

Why is the 60 psi setting shown on this page?

It is the final setting used after repeated testing on the Broken Arrow noise complaint.

Does the $199 starting price cover every PRV replacement?

No; it is the listed starting price for a whole-house water pressure test, with repair pricing quoted after diagnosis.

Acts of Service Plumbing service van at the shop
Acts of Service Plumbing

Real Techs. Real Answers.

Every job on this page is answered the way our own crew describes it — no scripts, no upsells.

Call Acts of Service Plumbing

Open 24 hours Monday through Saturday · Closed Sunday

(918) 891-1737