A great plumbing company values people. You will find at Acts of Service Plumbing; we value our customers and strive to put their needs first when it comes to serving them. When you find yourself in an emergency, give us a call. We offer incredible water heater repairs and lasting solutions!

Simple methods of finding the water pressure problem include

  • Identifying whether the issue affects all shower heads, taps, or hot water faucets
  • examining each sink, toilet, and shower for low pressure
  • examining a shutdown valve for evidence of deterioration
  • Checking for water leaks and damage at the sites of the walls, the washing machine, and the water heater
  • visual inspection of the pressure regulator and pilot light on your water heater


Low hot water pressure could have several frequent causes, some of them are as follows:

Mineral buildup and scale inside the plumbing systems. Scale and mineral deposits will gradually accumulate inside water supply lines if your home has hard water. The buildup may eventually get so bad that it restricts the flow of water, lowering water pressure.

Scale and sediment accumulation within the water heater.

Problems with scale and silt do arise in homes with tank-style water heaters. Tank-type heaters’ interiors are susceptible to corrosion, which finally settles to the tank’s bottom. It is important to realize the silt fragments can, on occasion, be dragged into the hot water supply line. It can result in a blockage that reduces water pressure.

kinked water supply pipes at the inlet or outlet.

 The majority of tank-style water heaters contain copper water pipes in an accordion shape, which are flexible. Water will not flow through a pipe properly if it is too curved or kinked, which may result in a drop in water pressure.

The plumbing lines are too curved to reach the faucet.

 The water pressure is also impacted by the distance that hot water must travel before it can flow from the faucet. If there are many bends in the pipe, the water loses pressure each time it comes into contact with the elbow.

The shutdown valve is closed and is not operating.

Water flow is limited if the water heater’s shutdown valve is only partially open. This will cause a reduction in water pressure in all hot water supply lines throughout the entire home.

Low water pressure permeates the entire house.

The direct main water supply pipe entering your home is frequently the cause of low water pressure in both your hot and cold water supply lines.

The size of the water supply lines is incorrect.

Tiny water lines reduce the water flow. This is due to the water flow trying to transition from a large conduit into a smaller pipe.

The primary shutdown valve for the house’s water supply is only half open.

Water pressure in both hot and cold-water lines will decrease if the water main supply line has been partially stopped.

Replace the pressure regulator. 

You won’t have good pressure inside a home with a pressure regulator if it was not set appropriately and was left on a lower water pressure. Additionally, if the regulator is broken or worn out, the water pressure may be decreased.

Have old steel water pipes in your home deteriorated? A deteriorated pipe effects the water flow. Steel water pipes that are still in use in residences will corrode and rust inside the water supply lines. The rusted parts can break off and form a minor clog that slows hot water flow and lowers water pressure, just as tank-type water heater sediment.

Does it have excessive scale buildup?

A worn-out faucet reduces the hot water pressure. Replacing the faucet can resolve the problem. Hard water scale and mineral deposits also build up inside faucets and fixtures.



Low hot water pressure – What’s going

  1. Sediment and Debris

On one hand, make sure you contrast the low hot water pressure with the high cold-water pressure. Is it identical? You may require a plumber to clean and flush your hot water unit if all that is running at a trickle is hot water. Your hot water tank may accumulate sediment and scale as it ages and corrodes. Over time, this may result in obstructions and poor hot water pressure.

  1. Showerhead and faucets

When a single outlet is the source of low hot water pressure, the solution is frequently rather straightforward. Is the hot water pressure in your shower low yet enough at the faucets? A clog in the shower head itself could be the cause. If you just moved in, make sure the showerhead isn’t a water-saving model. Worn-out taps causes low pressure. The solution is to replace all of the tap washers or to update.

  1. Leaks of Water

Not to mention, a leak is undoubtedly a more terrifying reason for low hot water pressure. You can easily identify one by going to the water meter and checking to see whether the numbers are still spinning. Verify to check if the hot water system itself is the source of the leak. The hot water system tank or joints in the unit’s pipes could be leaking.

  1. Check the filter flow on the hot water systems. In the same way, accurate installation of the filters is important. 

Sediment builds up inside them over time. A blocked filter, which is simple to repair or clean, is one of the most frequent causes of hot water problems.

  1. Tempering Valve

To prevent burns from hot water burns, the tempering valve in your hot water system controls the temperature. A damaged valve repairs are affordable.

  1. Pipes

What else becomes clogged? It’s your pipes! Usually, trash, rust, calcium, silt, and other deposits are to blame. Given these points, simple do-it-yourself techniques can fix clogged pipes. But for hot water pipes, you might need to give your neighborhood Gold Coast plumber a call.


In any case, did a professional plumber install your water system? Given these points, be sure the professional plumber did a great job. If not, improper installation could be to blame for your low hot water pressure. A typical error that can lead to this issue is using pipes with different diameters or having too many bends in the pipework.

  1. Water heating system

In any case, the issue is old age. It could be time to replace your hot water system if it has degraded to the point that it is leaking or supplying water at low pressure. If your appliance isn’t too old, it might only require minor servicing,   

Learn More About Us:

Is it possible to begin a plumbing company with only $13,000? Learn how Acts of Service Plumbing achieved the impossible because of faith at About Us | Plumbing Tulsa | Acts of Service Plumbing.

All in all, you can learn more about the companies we have had the pleasure of serving. Visit Paul Davis’ website to learn more at Paul Davis Corporate – Restoration and Emergency Service Provider.