Tops Reasons Why your water tank temperature and pressure valve are not working properly and how to fix it?
Maintenance of water tanks is necessary. Otherwise, you will start facing water tank temperature and pressure valve problems. There will be different reasons for facing such problems. So, it would help if you found out why you are facing water tank temperature and pressure valve problems to do the water heater tank repairs.
In further detail, we will discuss the reasons and then the tips for fixing those water tank temperature and pressure valve problems.
Reasons why your water tank temperature and pressure valve are not working
Following are the top 5 reasons you are facing water tank temperature and pressure valve problems:
The pressure relief valve is damaged.
Either you get high pressure, or sometimes there is no pressure in the water supply. When you start facing water pressure problems, it is a sign of damage to the pressure relief valve. Even if you set the water pressure but still are not getting the perfect water pressure of both hot and cold water, there is damage in the pressure valve that requires fixtures.
Otherwise, you will keep getting discontinued or unstable water pressure in your taps that might not work for you.
The water heater tank is not working
You are not getting a warm water supply, or sometimes while you are using warm water and you get a burst of cold water, your water heater is not working. Yes, you get a discontinued hot water supply when your water heater doesn’t heat water at your required temperature.
Your water heater tank might not be working, or there is damage, which now requires water tank repairs. Not getting a proper warm water supply might also be connected to the pressure relief valve of hot water. Anything can be the cause that why you are not getting a continuous hot water supply.
Low pressure of water
You need water tank repairs if you are getting low-pressure water. The water tank might be damaged therefore it doesn’t store water in it. There might be a problem with the pressure valve because you don’t get an adequate amount of water whenever you turn on the tap. Therefore, you need to check the water tank and the pressure valve.
There will be a problem in one of those two because otherwise, you will get full water pressure.
Leakage in pressure valve
The pressure valve is not damaged, and the water is also perfectly fine, which might cause a leakage in the pressure valve. You need to monitor the pressure valve closely if you notice a pond of water near your pressure valve that is a sign of leakage in the pressure valve.
Whenever a leakage occurs in the pressure valve, the water pressure you get in the taps will surely affect it.
Dirt or slime in the pressure valve
If you don’t clean up the water tank or don’t pay attention to water tank repairs, then the dust, dirt, slime, and sedimentation will start at the bottom of the water tank. Cleaning the water tank is necessary otherwise, it will affect your water tank pressure.
You will start getting a dirty water supply, and the pressure won’t be the same as before. The dust might enter into the pressure valve and then the pipes. The situation will get extra dirty if you do the water tank cleaning. It is one of the main reasons you don’t get high water pressure in your taps.
How to fix water tank temperature and pressure valve problems?
Now you know the problems, so you might be looking for tips to do water tank repairs. Let’s talk about a few solutions for water tank temperature and pressure valve problems:
· Check, maintain, repair, or replace the anodes
The anodes in the water heater tank heat the water; if you don’t clean them or replace them after 3-4 years, they will not heat the water. You might start getting a green hot water supply because of this reason, so before you jump to any other conclusion that you are not getting a hot water supply, you should open the water tank first.
Check the present condition of the anodes. If you think cleaning would be enough, then you should do that. If the condition is too worse, then you need to replace them. You will keep getting a dirty hot water supply, which will also affect the condition of your water tank and pipes. Therefore, first, you need to open the water tank and work on the anode rods to get rid of the water tank pressure and temperature problems.
· Cleaning of the water tank and valves
Not cleaning the water tank will make the situation a little difficult for you because you won’t be getting a pressure water supply. The water tank will keep getting dirtier, and the sedimentation will keep taking place at the bottom of the water tank. Therefore, you must clean the water and valves as well.
If you keep cleaning the water heater tank, then there is no way dirt will be able to enter inside the valves. You will keep getting frequent and clean water supply. The pressure will not get affected by any factor. So, another tip that you need to follow is to keep your water tank clean all the time. You can perform the cleaning procedure after every few months.
· Check plumbing connections
There might be loose plumbing connections because you are not getting a continuous or warm water supply. You need to check all the plumbing connections and tighten them. Well, you don’t have to tighten them too hard, but at least tight them to a limit, so the water leakage doesn’t take place, and you don’t have to face any water temperature and pressure problems anymore.
Final Recommendations:
If you are still not sure about what issue your water tank is facing, you can get in touch with us. Our experienced plumbers will visit you to give you the best possible solution.
Learn More About Us:
When it comes to finding a great company that can fix problems, visit Acts Plumbers Tulsa of Service Plumbing page: About Us | Plumbing Tulsa | Acts of Service Plumbing and then give us a call!