The ability to empower others go a very long way. We want to help empower our customers to thrive when it comes to water heater or plumbing repairs and practical wisdom for success. Please enjoy the article we have provided below.

7 Easy Ways to Get Rid of Rust and Stains on Your Sink

Are you tired of looking at stained and rusted sinks? Have you tried everything you can think of to remove them, but nothing seems to be working?

Well, rust and stains on your sink won’t go away easily and so, it can be a challenge to keep your sink looking shiny and new.

But don’t worry! It’s a common annoyance and we’ve got the solution for you!

With the right cleaning products and techniques, you can certainly get rid of those pesky stains and rust.

In this blog post, we’ll be discussing 7 easy ways to get rid of rust and stains on your sink.

From using lemon and salt to commercial cleaners, we’ll provide you with all the ingenious ways you need for restoring your sink to its former glory.

So, keep reading and learn how to bring back the shine of your sink today!

What Causes Rust and Stains?

Having a sink that is covered in rust and stains can be unsightly and unpleasant. But it’s important to know the actual cause of rust and stains so you can better avoid them at first.

  • Issues with water supply – If the water entering your home has high iron content and you don’t have a filter or a water softener installed; you could end up having rust stains. Such water appears normal in taste and in looks but it can cause rust stains along toilet bowl and sink. So, if you think that’s an issue, you can ask a plumber to have your water tested or you can install a filter system to avoid such annoyance.
  • Bad fixtures – Other common causes of rust stains include corroded fixtures, rusty pipes, and deteriorated water heaters. So, even if your water supply doesn’t have high iron content, still you have rust particles in the supply. If these are causing your rust stains, then you should replace these bad plumbing fixtures.

You can obviously use below methods to remove the rust stains for the time being. But to avoid them from returning; you need to know the root-cause and fix it once and for all.

Using Lemon and Salt

One of the simplest methods is to mix lemon juice and salt together and use it as a paste. Apply it directly to the stain and let it sit for several hours or overnight before scrubbing with a soft cloth or toothbrush.

The acidity in the lemon juice will help break down the rust particles, while the salt will act as an abrasive to help scrub away any residue.

It is important to use caution when using this method, as these acidic substances can potentially damage your sink if left on for too long. Once you have finished, be sure to rinse off any leftover residue with cold water.

Pumice Stones

Pumice stones are one of the oldest and most effective ways to remove rust stains from your sink. This natural material is known for its ability to safely and quickly remove unwanted buildup on metal surfaces.

To use pumice stones, wet the stone with a little water. Gently scrub the affected area with the pumice stone in small circles to remove the rust. Take care not to scrub too hard, as it can scratch the surface of the sink.

Once the rust has been removed, rinse the area with warm water and wipe it dry with a soft cloth.

You should notice the rust is gone or significantly reduced. Repeat this process as necessary until all rust stains have been removed.

Please do not hesitate to give us a call as you will see we offer great water heater repairs.

Baking Soda

You can also try using baking soda and a damp cloth. It is pretty easy to use and is readily available.

To use baking soda to remove rust, make a paste by mixing together 1/2 cup of baking soda with 3 tablespoons of water. Apply the paste to the rust stain and let it sit overnight. Then use some elbow grease and a scrub brush or sponge.

If you need more scrubbing power, add a little bit of white vinegar to the paste. Let the paste sit for 10-15 minutes and then rinse it away with water. You should see the rust stain starting to disappear. Repeat as necessary until the stain is gone.

Abrasive Scouring Pads

Abrasive scouring pads can be used to scrub the surface of your sink with a little bit of water and some elbow grease. When using an abrasive scouring pad, be sure to use a light pressure and not to rub too hard. This will help ensure that you don’t cause any damage to your sink.

Also, make sure to rinse off the scouring pad after each use so that it does not create any additional rust or stains on your sink. If you are concerned about damaging the finish on your sink, try using a softer scouring pad.

Commercial Cleaners

There are many different kinds of commercial cleaners available, including rust removers, rust converters, and rust inhibitors. Rust removers work by chemically breaking down the rust and removing it from the surface of your sink.

Rust converters are designed to convert rust into a protective coating, preventing further corrosion. Finally, rust inhibitors are applied after the rust is removed to help prevent future rusting.

Using a commercial cleaner is fairly straightforward: simply apply it directly to the rust stain, leave it for the specified time, and then rinse off with water.

Make sure you read the product label to ensure you are using the correct cleaner for your type of sink material.

After using a commercial cleaner, it’s always a good idea to finish off with a cleaning agent that won’t leave residue or dull the finish of your sink.

When you need a trusted company for water heater give our dynamic team a call!

Prevention Tips

The best way to prevent rust from forming on your sink is to take preventative measures. Here are a few things you can do to keep rust away:

  • Clean the sink regularly. Take a soft cloth or sponge and wipe down the sink after each use. This will help keep soap scum and other dirt off the surface, which can cause rust stains.
  • Dry the sink after use. Leaving water on the surface of your sink can cause it to become discolored and eventually lead to rust formation. After each use, take a clean cloth and dry off the sink to prevent any water buildup.
  • Use protective sprays or waxes. You can buy protective sprays and waxes that help create a barrier between the metal and moisture. Spray this on the sink once every few months for added protection.
  • Avoid harsh cleaners. Many store-bought cleaners contain abrasive ingredients that can scratch the surface of the sink and leave behind rust particles. Choose a mild cleaner instead, like dish soap or a natural vinegar solution.
  • Please do not hesitate to give us a call as you will see we offer great water heater repairs.


Rust stains can be difficult to remove, but with the right technique, you can make your sink look like new. Whether you use lemon and salt, pumice stones, baking soda, abrasive scouring pads, commercial cleaners, or a combination of these methods, you should be able to eliminate the rust stains and keep your sink looking clean and shiny.

Remember that prevention is key – be sure to regularly check and clean your sink to prevent rust buildup in the future.

Fun Fact:

On About Us | Plumbing Tulsa | Acts of Service Plumbing, you’ll find how our owner Rick Hudson overcame his early plumbing challenges. Learn more about our leaders and team.

One of many great companies we’ve had the pleasure of serving is making a difference in the Tulsa and surrounding areas. Visit their website: Paul Davis Corporate – Restoration and Emergency Service Provider.

Did You Know? We provide remarkable water heater repairs. Please give our team a call today!

When you need a trusted company for water heater give our dynamic team a call!