The water heater is a very important functioning system in your home, that’s why we offer the sound wisdom for plumbing Tulsa in this article. The water heater is responsible for converting cold water into hot water. Water heating systems are used in those areas where the winters stay for quite a long time compared to the summer season.

However, they work excellently unless the minerals like calcium or magnesium start to deposit inside them. This type of water, called hard water, is responsible for damaging the water heaters as it stops the water flow. It also makes the lifespan of the water heating system reduced.

Therefore, by the end of this article, you will be able to know the ways to prevent your water heater from mineral deposits. Hence, keep reading the mentioned details for further insights.

Why do water heaters get deposited with minerals?

Before we dive into the ways to prevent your water heater from mineral deposits, you must know what causes the preceding problem. Well, the water heating systems heat a very large amount of water responsible for the leaching out of the minerals like calcium and magnesium.

It makes them get stuck around the water pipes, which makes it difficult for the water heater system to hear up and carry on with the flow of water.

Minerals like calcium, magnesium, and much more are the cause why the water heating systems cannot function for a longer time and get damaged very quickly. Hence, that is why many people worry about the underlying problems of the deposition of the minerals.

How to prevent your water heater from mineral deposits?

There are many ways by the help of which you can be able to prevent the formation of minerals deposition. However, not all the ways are effective.

Therefore, some of the basic and promising ways to prevent the formation of minerals deposition in your water heating systems are mentioned below.

1.      Make sure to flush the water yearly.

Do not abandon your water heating system, thinking it does not need attention or cleaning. Instead, you should remember that it is important to shut off your water heater once a year to let it cool down.

It helps in flushing out the deposits that might have formed inside it. It is a very effective way to help you easily ensure that all the calcium and magnesium deposits are flushed out. Also, if the water heater has been clogged up due to the formation of calcium deposits, it will be easily removed with the flow of water.


2.      Take the help of pure chemicals.

The other way of treating your water heater from the mineral deposits is to use organic chemicals. Pure chemicals like vinegar are very useful in such cases. You can get this method done by adding chemicals like vinegar inside the water heating tank after you have flushed it out.

Once you have added the chemicals, let it sit down for about an hour or two. It will ensure that all the mineral deposits get dissolved and then flush the water heater again after adding chemicals.

This method is quite easy and does not have any side effects. If you are looking for a better way to do so, get the best services from any experienced working plumbing Tulsa or get our services since we offer the best plumbing Tulsa workers.

3.      Do not let the temperature get too high.

Most people do not pay much attention to the rising water temperature and continue their routine. However, letting the water heater reach a very high temperature higher than average might be the main reason the water heater gets clogged up the mineral deposits.

That is why you must ensure that the water heater temperature remains between the normal range of 120 degrees Fahrenheit to 140 degrees Fahrenheit. A high temperature of the water heater will probably cause more release of the calcium ions as it is more prone to higher temperatures.

For noting and maintaining the water heater temperature, you can contact us since we have the best plumbers Tulsa.

4.      Installation of the water softener system

Yet another way to fight the problems of the deposition of calcium and other minerals in your water heater is to opt for a long-term solution: the water softener system. One solution is removing the ions. It can a good reason  why the water hardens.

Meanwhile, you need to remember that water softener systems are expensive. We encourage you to explore affordable options. For example, call us for the best plumbing Tulsa services today.

Your budget is important as well as pricing. In fact, it is good to research the best long-term investment strategies.

5.      Making lemon spray

When life gives you lemons, use them to make the lemon juice spray. In fact, the ingredients in lemons can be very helpful in eliminating hard water.

So, if you are looking for a homemade-based solution, the lemons can always come in handy. Or else you can contact the best plumbing Tulsa workers who can provide you with a similar solution.

6.      Buy a new water heater system.

After trying all the ways mentioned above and nothing works, try this one!  The only option remains is to buy a new one. It can be a limited option for many. Everyone doesn’t have the budget capacity to purchase a new system.

Does the water heater tank seems to not working? If so, you might have to buy a new water heater.

7.      Ask for professional help.

Last but not least, another way is to ask for professional help. Please contact us to get the best plumbing Tulsa services. We an excellent and skilled team. We do not claim to be the best, but we do claim to offer you the best services!

Hard water can be very dangerous for your health and the water heating system. It can wear off the whole system and reduce its life span.

We serve Paul Davis frequently for plumbing services. We encourage you to visit their website: Paul Davis Corporate – Restoration and Emergency Service Provider.

Learn a Fun Fact:

How did Ricky Hudson, owner of Acts of Service Plumbing, over his first plumbing mistake? Visit About Us | Plumbing Tulsa | Acts of Service Plumbing to find out!