From A Great Plumbers Tulsa Team:

A dripping faucet will keep your basin wet, and you will always notice those white stains on the basin and the faucet if it is in a metal shade. A dripping faucet will not allow no matter how much you try to keep your basin clean. Therefore, you need to fix your dripping faucet. Plus, it is a waste of water, and there is nothing difficult in fixing a dripping faucet.

We will discuss how you can fix a dripping faucet without getting Plumbers Tulsa help.

A step-by-step guide to fixing a dripping faucet

If there is a dripping faucet and you want to fix it without getting Plumbers Tulsa help, then here is a step-by-step guide that will surely help you to fix it:

Get a faucet repair kit

You will require a faucet repair kit if you fix the dripping faucet on your own. The repair kit must have the following tools:

  • 4-in-1 screwdriver
  • Pliers
  • Allen wrench
  • Slip joint pliers
  • Adjustable wrench
  • Crescent wrench

Well, these were the toolkit things, but to fix the faucet, you will require a few more items:

  • Plumber’s grease
  • O-ring seals
  • Faucet repair kit
  • Scouring pad
  • Washers
  • Duct tape
  • Distilled white vinegar

You will have to gather all these items because you might not know the actual reason behind your faucet dripping situation. Without these tools, you won’t be able to fix the problem. Therefore, you will have to visit a hardware store to gather everything. You might have to replace the whole faucet, or there might be a problem with the cleanliness of your faucet. So, anything can be the cause of your faucet dripping. So, gather the items before you jump onto the next step.

Shutoff the water supply

Once you gather the tools to fix the dripping faucet, you can start the real work. First, find the main water supply valve. If the water keeps dripping from the faucet, you won’t be able to fix it that way. So, shut off the water supply so water will stop dripping. You can keep doing this if you don’t want to fix the faucet, but it won’t be a permanent solution.

So, shut off the water supply and start fixing the faucet with the faucet repairing toolkit that we have mentioned above.

Remove the handle cap and retaining clip

The first thing that you need to do before you remove the handle is that you have to duct tape the jaws of your slip-joint pliers. Use distilled water and white vinegar solution to clean mineral deposits from the faucet.

Now it is time to remove the handle cap from the top of the faucet handle. You will have to unscrew the handle screw, and then once it loosens, tilt it and pull it back. Be careful while removing the faucet parts, and keep them organized. You can even label the parts if you want.

If a retaining clip is present, you will have to take it out while using needle-nose pliers.

Loosen up the cartridge

You will get a spanner cap in the toolkit and have to use it to remove the cartridge. Get a grip on the spanner cap and remove the cartridge with slip-joint pliers while twisting it back and forth.

Replace faulty parts

Once you remove the cartridge, you might find the problem in your faucet that was the cause of dripping all the time. Most of the time, the faucet parts wear out after a period, and you must replace them. If you don’t replace them on time, your faucet will keep dripping.

Find the faulty parts of your faucet, and you will have to replace them. While replacing the faulty parts, keep cleaning them with distilled water and white vinegar if you find mineral stains on them with the help of a scouring pad. It is time to remove the old O-ring and install the new one using the plumber’s grease. Just be careful and try to do this like a professional plumber.

Install new faucet parts/whole

If you think that the whole faucet is damaged, then you can replace the whole old faucet with a new one. Otherwise, you can find the faulty parts in the faucet and replace them. It depends on you. It would be wise that you replace the whole faucet if it has been years since you have been using the same faucet.

There is a possibility that if you replace the faulty parts of your faucet, only then it might start to drip after a while. So, look for the faucet condition and then take the decision.

Put everything back

Once you fix the faucet, it is time to put everything back. If you have labeled the faucet parts at the start, it will help you put the part accurately now. Just be careful and pay attention while you are putting everything back. If you forget to install the faucet parts correctly, you might have to start the whole process.

So, the last step would be putting everything back by using the toolkit, and once you are done, turn on the water supply. Check if the faucet is dripping or if you have fixed it perfectly.

Why your faucet drips even if it is shut off?

If it’s been years since you installed your faucet, and now it has started dripping, then it is quite common. After a while, faucets start to drip a little. You can fix it by following the guide that we have mentioned above. There might be an issue with the washer if we discuss sink faucets. The seat washer screw might be why your faucet is dripping all the time, even if it is shut off completely.

Final Remarks:

We have mentioned the easiest way to fix a dripping faucet. You can call for Plumbers Tulsa’s help. We will listen to you to give you best solution for as per your issue. We will be your best stop to all plumbing issues.

Learn More About Us:

When it comes to finding a great company that can fix problems, visit Acts Plumbers Tulsa of Service Plumbing page:  About Us | Plumbing Tulsa | Acts of Service Plumbing and then give us a call!

One of the many companies we’ve had the pleasure of serving faithfully over the years is Paul Davis Corporate – Restoration and Emergency Service Provider. Learn more about them today!