Learn more from an exceptional Best Plumbing Tulsa team that truly cares about their customers and their families. Keep your home in tip-top shape this winter season. Enjoy the article below.


Anything from tree branches to dead squirrels — whatever can fit in the pipe. Depending on the severity of the clog the water level on your toilet can be affected since air simply isn’t getting through.

You can try and deal with the sewer line vent yourself by gaining access to your roof. See if anything external is blocking the pipe. If not, then shine a flashlight down the pipe.


Use screens and filters

Every drain in your home should have a wire mesh screen or comparable type of filter to trap debris, hair, and food scraps if you have experienced clog issues in the past. We strongly advise using these drains because they’re one of the simplest and most efficient solutions to avoid clogging issues. Just be sure to keep them clean periodically.

After use, clean the kitchen pipes.

Have you just completed cooking or doing the dishes? Running hot water through your kitchen sink is a wonderful idea (vinegar can help too). Small amounts of oil and food particles can safely pass through your pipes with the help of hot water, as opposed to being stuck. since you don’t want to wastewater, use this opportunity to clean off dishes for the dishwasher or similar tasks!

Understand what should never be flushed down the toilet

Inappropriate use frequently causes pipes to become clogged. Avoid flushing anything down the drain, including toilet paper, grease, and coffee grounds. The same is valid for big, sturdy objects that won’t rot, such as seeds or discarded shells and skins.

Make Maintenance and Occasional (Safe) Drain Cleanings

A flush out with a bacteria-based drain cleaner can still aid in preventing clogged pipes, despite the fact that chemical drain cleaners have a bad image these days for the harm they cause to your plumbing. If there is a problem, organizations like Ragsdale can also provide maintenance and pipe cleaning services for sewage systems and harder-to-reach pipelines.


1) Insufficient water in your toilet tank

The toilet tank should be the first place you look when trying to identify the source of delayed draining. The toilet tank cover should be removed and stored safely. Next, check the fill level in your tanks.

Your toilet tank is most likely the problem if the tank water appears to be lower than usual. When your toilet’s waterpower is low, it won’t flush with much force.

Even with maintenance, toilet components and systems eventually wear out.

2) Blockage or Buildup in the Drain

A clogged toilet is frequently visible, even to someone with no plumbing experience.

But sometimes the issue is more complex. There may be a partial obstruction or deeper in the system, take place. A simple blocked toilet is considerably easier to handle than a system blockage.

So how can you tell if your sewage system has drain buildup?

A gallon of water is a decent test you can use. Fill the toilet bowl with the water you just took. If the water starts to rise right away, a clogged drain is the problem.

3) Sediment or Mineral Consolidation Along the Rim

The amount of water pressure released with each flush might gradually decrease as minerals and sediments accumulate along the sides of these openings. We’ll discuss the many solutions you can use to address each of these issues in the section that follows.

1) Discard the harmed fill tube

The fill tube is a tiny but crucial part of the toilet tank’s interior. Typically black in color, flexible rubber makes up the tube. It enters the overflow tube, a large vertical tube.

The fill tube is in charge of moving water from the tank to the bowl with each flush. The fill tube may eventually unclip if it sustains enough wear-and-tear damage over time.

As a result, the tank will start to fill with water, which shuts off the valve. The dish so gradually filled with water. Examining the fill tubing in your toilet tank will allow you to resolve this issue.

If the tube is disconnected but looks to be in good condition, then you can simply attach it back onto the cylinder. However, if the tube appears damaged, then you will need to replace it.

2) Change a broken toilet bowl

Although less frequent than a broken fill tube, this issue is nonetheless possible. The toilet’s lower bowl might occasionally develop a crack. Water will start to pour out gradually due to this breach.

Puddles around the toilet’s base serve as a good indicator of its presence. There will also be a noticeable replenishment of the water in the toilet. Unfortunately, a cracked toilet bowl cannot be easily repaired.

Any sealants you use will most likely only be temporary. The toilet will probably need to be completely replaced and a new one installed. Call your neighborhood plumber if you don’t feel confident replacing your toilet.

When you are needing best Plumbing Tulsa services, count on us today!

3). Handling a clogged sewer line Vent

a drainpipe A pipe that exits the bathroom wall and ascends to the roof of a home or structure is known as a sewer line vent. The purpose of the pipe is to supply the drainage system with clean air so that water can flow through it.

Learn More About Us:

When it comes to finding a great company that can fix problems, visit Acts Plumbers Tulsa of Service Plumbing page:  About Us | Plumbing Tulsa | Acts of Service Plumbing and then give us a call!

One of the many companies we’ve had the pleasure of serving faithfully over the years is Paul Davis Corporate – Restoration and Emergency Service Provider. Learn more about them today!

Learn More About Us:

Is it possible to begin a plumbing company with only $13,000? Learn how Acts of Service Plumbing achieved the impossible because of faith at About Us | Plumbing Tulsa | Acts of Service Plumbing.

Our clients love our workmanship. One of them is: Paul Davis Corporate – Restoration and Emergency Service Provider

Still need Best Plumbing Tulsa services? Call our great team today!