How running toilet is a sign of serious plumbing issues, and how to fix it: learn from the best plumbing Tulsa team in town!

Plumbing issues are no less than a nightmare for homeowners. A running toilet is one of them. Here we will explore this problem and the simple fixes you can try. While it seems difficult to fix, most people consider it a DIY task. However, if you do not have a lot of experience dealing with such issues, you need to get our best plumbing Tulsa services. Learn more about our company when you visit: About Us | Plumbing Tulsa | Acts of Service Plumbing. 

What is a running toilet?

A running toilet is a situation where your toiler has running water even when you flush it. The water can be slower, or the flow can be fast. It usually depends on the cause of the problem and its intensity.

Cause of a running toilet.

Understanding the working of a toilet tank is important to deal with a running toilet. When the toilet tank starts filling, a valve at the base stops water from exiting the tank. As water fills, the rod rises to stop the fill valve. If that is not working, the water level keeps rising, reaching the point where it goes into the overflow tube.

When you flush the toilet, the water escapes from the flush valve, which repeats every time you flush your toilet. If you have a running toilet, there are major chances that any of these valves or the rod is not working properly.

Different reasons you are facing these serious plumbing issues with your toilets.

A running toilet can sometimes be an indication of some serious issue going on with your toilet. Below are the details of some issues and their solutions that you can try. If you are unsure how to fix this issue, feel free to call our best plumbing Tulsa services.

So, you opened the top of the tank. Now, these are the 4 things that you need to check:

Plumbing issues with the overflow tube

The first one on the list is the toilet tank overflow tube. It is there to prevent flooding in the bathroom and drains excessive water from the tank before it starts leaking from the top of the toilet’s tank. You can check issues with this part of your toilet by checking the water level inside the tank. If the water level rises above the opening of the overflow tube, then you will get a running toilet.

How to fix it?

You can do a few ingenious things to fix the issue of running toilet if the issue is caused by the overflow tube. First, check if the overflow tube is very low than the inlet. If that is the case, you need to replace the tube, or you may adjust its height if possible. The other better solution is to adjust the float rod and the float cup.

There are chances that these are not cutting the supply of water. There will be a screw that attaches the floating rod to the filling valve. Tighten this screw counterclockwise to adjust the water level inside the tank. Doing so will resolve the issue with the overflow tube.

Plumbing issues with the flush valve

The flush valve is a whole assembly connecting the flapper, a gasket, chain, and lever. If that valve does not close, water will keep coming out of the tank. So, you will get a running toilet.

How to fix it?

The first thing to check here is the chain that connects with the flapper. The short chain can be why the flapper is not closing the flush valve all the way. Disconnect the chain from the top and see if the flapper closes the valve.

If leakage continues, then you need to check the flapper. Mineral buildup around the rubber or warped flapper may not sit flush with the value. If the issue is dirt and buildup, you can clean and assemble everything back. Otherwise, you may need to replace the flush valve.

Plumbing issues with the fill valve

The last thing our plumbers Tulsa recommend checking is the fill valve. There are chances that everything is working correctly, but this valve is not stopping the water supply. A nonstop supply of water will always supply water to the overflow tube resulting in a running toilet.

How to fix it?

Fixing it mainly includes checking the water level inside the tank. If the overflow tube and water level have a difference of an inch at least and the float rod is also working correctly, then the issue will be with the fill valve. The best way to fix this problem is by replacing the fill valve so you may not face the issue again.

Wear and tear can also cause a running toilet.

While our professional plumbers Tulsa ensure that they do not leave any serious plumbing issues, sometimes wear and tear is why you have a running toilet. In such a situation, your best choice is to get professional Plumbing Tulsa services. However, you can also opt for a DIY fix.

How to fix it?

Wear and tear can break any component inside the toilet tank, or there could be loose levers or handles. The most effective way to fix such an issue is by tracking the problems down to their roots and then replacing or fixing everything. Although replacing all the cheap parts is a better idea, if a part is still good enough, you can still use it by fixing the problem.

With these 4 main plumbing issues being the cause of a running toilet, you need to make sure to get the best solution. The best practice is to check every component because the issue often lies with more than one thing inside your toilet tank. Our plumbing Tulsa professionals check everything in your toilet tank so that when they are done, the tank works like a new one again.


Do not have the right tools and knowledge to deal with a running toilet? Do not worry, as our best plumbing Tulsa services have your back. A running toilet can be a serious plumbing issue that you must resolve as soon as possible. If you ignore this issue, it may cost you a hefty amount on the water bill. One of the many well-known companies we have worked with is this one:Paul Davis Corporate – Restoration and Emergency Service Provider.